Dyno tuning is the best way to optimise your engine for performance. You will experience better acceleration and power while reducing emissions and fuel consumption.
In addition, Classic Performance dyno tuning Adelaide saves you money at the pump and cuts down on expensive repairs down the road. It also ensures your engine lasts longer.
Better Fuel Economy
Getting your car on a dyno isn’t cheap, but it’s probably the best performance-enhancing investment you can make. It will help your engine run more efficiently, resulting in better fuel economy. Not only will this save you money at the pump, but it will also reduce emissions and help protect our environment.
Dyno tuning can also help you find out if your engine has an issue that needs to be addressed. For example, if you’re experiencing poor throttle response or your car won’t start at all, a dyno test can show if it’s a problem with the airflow or spark plugs. It can help you avoid a costly repair bill down the road.
It can also be helpful for your car’s performance if you dyno-tune it before adding any performance upgrades. It will allow the tuner to optimise the power and ensure that everything is balanced properly. It’s also a good idea to get your car dyno-tuned after a major upgrade, like an intake or exhaust system, to see how much additional horsepower it has.
It’s important to remember that every dyno reads differently, and many factors can affect the results. A good tuner will use a power-correction method that takes into account air temperature, barometric pressure and other environmental conditions.
Increased Power
A dyno is an engine simulation machine that uses data acquisition and graphing techniques to measure horsepower and torque. It is an essential tool in the tuning process, whether it be for a carburettor classic or a reflashed street car. The modern dyno can run your vehicle through the entire RPM range in as little as 8-10 seconds!
Dyno tuning can increase the performance of your vehicle by optimising the ECU’s lookup tables. It is done by changing the parameters within the ECU to match your engine’s specification – for example, if the car produces 80Nm of torque at 8000 RPM, by altering the ECU settings, you can increase this number to 90Nm at the same load and RPM, thereby increasing the engines power output. However, if your engine isn’t built properly, the higher torque may put strain on your components and lead to premature wear and tear. That is why it is important to use quality parts and avoid putting your engine through unnecessary punishment!
Fewer Emissions
During the dyno tuning process, your vehicle will be optimised for power and efficiency. It will cause your engine to use less fuel, reducing your carbon footprint. It will also reduce acceleration flat spots, meaning you’ll need to visit the gas station a lot less often.
A well-tuned engine will be less susceptible to knocking and pinging, so you can run higher-octane gasoline without worrying about damaging your engine. Having your ECU or TCU remapped through dyno tuning will allow you to unlock the full potential of your engine, giving it increased horsepower and torque.
Classic Performance dyno tuning Adelaide can help resolve a variety of issues, such as poor gas mileage, surging, difficulty starting and a lack of power. By optimising the air-to-fuel mixture and ignition timing, your technician will be able to release your vehicle’s hidden power with one simple process.
While you can find a dyno anywhere these days, there are two popular types of dynamometers – the hub dyno and chassis dyno. A hub dyno allows the technicians to measure engine numbers, while a chassis dyno can measure a car’s power output at the wheels. Danny prefers to use a Mustang MD-150 chassis dyno because it’s load-bearing, allowing him to hold the engine at a specific RPM and load while collecting data. It makes for an accurate and precise dyno reading.
